TECHNICAL DATA:
Model SLIT-HSC-1300
UNWIDN WIDTH: 300 ~ 1300 mm weight
MAX. MATERIAL WIDTH 1300 mm 1 metric ton
UNWIND DIAMETER: 1000 mm ***UPGRADED ***
UNWIND ROLL CORES: 3′′ (76 mm) and 6”
REWIND WIDTH: 50 mm upwards
Condition: need enough cutter and max. loading weight on each shaft is
less 250 kg
REWIND DIAMETER: 600 mm
REWIND ROLL CORES: 3" (76 mm) 6” optional
MACHINE SPEED: 400 M/min
(DEPENDS ON SLIT WIDTH AND QUALITY OF FILMS)
MATERIALS: PLASTIC FILMS SUCH AS PE, PP, PET AND LAMINATES.(DEPENDING ON
MATERIAL CHARACTERISTICS ,GAUGE, SLITTING WIDTH)
(DEPENDING ON MATERIAL CHARACTERISTICS , GAUGE, SLITTING WIDTH)
THICKNESS SOFT FILMS: APPROX. 12-150 micron
POWER: 220VAC 3 phase 60 HZ
STANDARD ACCESSORIES :
UNWIND UNIT:
1. DESIGN: INTEGRATED WITH MAIN STRUCTURE, SHAFTLESS WITH CHUCKS.
LIFT UP /DOWN CONTROLLED BY HYDRAULIC SYSTEM
2. RIGHT CHUCK: FIXED CONICAL
LEFT CHUCK: EXPANDING, AIR ACTUATED FROM RIGHT SIDE
SUITABLE FOR PAPER CORE DIAMETER: 3′′ (STANDARD)
CORE WIDTH ADJUSTMENT QUICKLY BY MANUAL TO ACCOMMODATE DIFFERENT
WIDTH.
3” expanding chuck –left side 3” chuck adjust by manual-right side
3. LINE & EDGE WEB GUIDE SYSTEM BST SYSTEM................................................................................ 1 SET
SBST EKR500 Plus with Scanner SBST CLS Pro 600
(UPGRADE ADD ULTRASONIC FORK FOR EDGE DETECTION WITH MOUNTING)
Movement distance:+-100mm
Function : for both of line and Edge tracing
Sensor tracing distance:+- 10mm
Motor tracing speed: 24mm/ second
4. AUTOMATIC TENSION CONTROL SYSTEM VIA PLC CONTROL..................................................... 1 SET
5. LOAD CELL DETECTOR:50 kg (Max.)........................................................................................................ 1 SET
6. OUT OF MATERIAL ALRAM .......................................................................................................................... 1 SET
*Machine will slow down with alarm or stop automatically if pre-set meter is reached.
7. AUTO. TENSION CONTROL SYSTEM : AUTO. & MANUAL MOLD.
AUTO. MODE: THE TENSION COULD BE COMPENSATED BY LOAD CELL.
MANUAL MODE: SET TENSION PERCENTAGE AND WILL BE KEPT AT
SAME TENSION WITHOUT COMPENSATION.
8. SPLICING TABLE WITH WEB CLAMPING DEVICE .............................................................................. 1 SET
SLITTING UNIT:
1. INFEED DRIVING DRUM :160φ.................................................................................................................. 1 SET
2. NIP ROLLER........................................................................................................................................................ 1SET
3. SLITTING SYSTEM:
*RAZOR CUTTER.............................................................................................................................................. 14 SETS
4.
*GROOVE ROLLER FOR RAZOR CUTTER ............................................................................................... 1 SET
The razor blade could be re-tooled for cut in grooves or in the air by changing the
corresponding slitting materials
5. 1HP BLOWER (EDGE TRIM DISPOSAL).................................................................................................. 1 SET
REWIND UNIT
1. UNDER PRESSURE RUBBER LAY-ON ROLLER
LENGTH-1300 mm............................................................................................................................................. 2 PCS
(Other width beside 1300mm is option)
2. BALANCED STEEL LAY-ON ROLLER WITHOUT CYLINDER-300 mm......................................... 4 PCS
(Other width beside 300mm is option)
3. REWIND DIFFERENTIAL SHAFT- EXPANDING BY INNER TUBE
WIDTH OF QUICK LOCK: 25 mm
SLIT-HSC1300: 3′′COMPLETE SHAFT........................................................................................................ 2 SETS
4. STATIC ELIMINATOR ..................................................................................................................................... 1 SET
5. COUNTER.............................................................................................................................................................. 1 SET
6. AUTO. TENSION CONTROL VIA PLC CONTROL.................................................................................... 2
SETS
*Tension controlled by Algorithm-based on PLC.
7. TAPER TENSION CONTROL...........................................................................................................................2
SETS
8. FINISHED ROLLS UNLOADING (ROTATING TYPE IN ORDER TO ROTATE FROM MACHINE
AND POSITION ROLLS FOR UNLOADING AT SAME HEIGHT)........................................................ 1
DRIVING & CONTROL SYSTEM :
1. MASTER MOTOR ABB QABP100L4B 5HP.............................................................................................. 1 SET
SLIT-HSC-1300: 5 HP
2. MASTER MOTOR DRIVER: AC VECTOR INVERTER (YASKAWA-A1000)................................... 1 SET
SLIT-HSC-1300: 220V 5 HP
3. UNWIND TENSION CONTROL - POWDER BRAKE FKB-10XN Lan Ling ................................... 1 SET
SLIT-HSC-1300: 10 kg/m
4. REWIND MOTOR: ABB QABP100L4B 5HP............................................................................................. 2 SETS
SLIT-HSC-1300: 5 HP
5. REWIND MOTOR DRIVER: AC VECTOR INVERTER (YASKAWA-A1000).................................. 2 SETS
SLIT-HSC-1300: 220V 5 HP
6. PROGRAMMABLE CONTROL SYSTEM(P.L.C-Fatex)........................................................................... 1 SET
7. COLOR HIGH ANALYSIS TOUCH SCREEN FOR SETTING & DISPLAY
OF PARAMETERS (DELTA-8”)..................................................................................................................... 1 SET
SPARE PARTS: (FREE OF CHARGE)
1. BELT ...................................................................................................................................................................... 1 SET
2. RAZOR BLADE ................................................................................................................................................... 10 PCS
3. TOOL KIT............................................................................................................................................................. 1 SET