Comes in the following sizes:
- 70mm Dogwalker Cone
- 84mm Special Cone
- 84mm Cig Tube
- 98mm Regular Cone
- 109mm King Cone
Every cartridge comes standard with one complete cartridge setup. This includes the cartridge, riser, and tamping tool that will aid in packing your material during operation.
This machine is designed to be used atop our vibration table. Please Note: without the vibration table, the cartridge will not be as effective.
Includes a Filling Machine Cartridge, Riser, and Tamping Tool
Designed for use with our VB1 or VB2 Vibration Table
Made in the USA from high quality, all-natural, sustainably sourced materials
HOW TO USE THIS FILLING MACHINE STARTER KIT:
- Place the cartridge on the vibration table (not included); set the riser aside for now.
- Fill the holes of the cartridge with your cones.
- Turn on the vibration table (not included).
- Fill the top of the cartridge with your material.
- Use the included tamping tool to pack your material during operation. PLEASE NOTE: Firmly tamp your material early in the filling process to ensure a firm, crisp, tight pack right near the crutch.
- Once your cones are nearly full (leave some space at the end to twist), turn the vibration table (not included) off.
- Pick up the cartridge and place the riser underneath the cartridge.
- Set the cartridge down on top of the riser, and the cones will be pushed up so that they are accessible.
- Remove each cone and twist the end to finish.
Our filling machines can be cleaned with hot water up to 130º F but will warp over time if used in a dishwasher. We recommend using an isopropyl (rubbing alcohol) and salt mixture, commonly used to remove plant resin and residue. Please do not expose our machines to temperatures over 130º or leave outdoors in direct sunlight.